Ensley Yellow Jackets Jersey Bling Patch Set (Iron-On)
Ensley Yellow Jackets Jersey Bling Patch Set (Iron-On)
Ensley Yellow Jackets Jersey Bling Patch Set (Iron-On)
Ensley Yellow Jackets Jersey Bling Patch Set (Iron-On)

Ensley Yellow Jackets Jersey Bling Patch Set (Iron-On)

BPSET03
Regular price $55.00

Iron On/Heat Press Bling Patches Only. ***Does not include the jersey. Includes 9 bling patches and the two bling transfers for the jersey neckline.
  • Front Design Bling Patches: Team name and number on front
  • Back Design Bling Patches:  Name and numbers on back
  • Sleeve Patches: Numbers on both
  • Includes two bling transfers for the jersey front v-neckline.
  • Bling patches are custom-made by hand. Please note: All of our patch material is black.

Patch Application Instructions:

Household Iron Instructions
  1. Heat up your iron to the highest setting, which is usually the cotton setting. Please TURN OFF the steam.
  2. Place the patch on the desired area of the garment with the design side facing up and the back (adhesive) side facing downward.
  3. Cover the patch with a teflon or parchment sheet. This step is very important!
  4. Press the iron down firmly on top of the patch for 30-35 seconds.
  5. Turn the garment inside out and repeat step 3 and 4 for 15 seconds.
  6. Allow the patch to cool and then apply your next patch.
Jersey V-Neckline Transfer Application Instructions
  1. Heat up your iron to the highest setting, which is usually the cotton setting. Please TURN OFF the steam.
  2. Place the garment on a flat heat resistant surface. Then place the bling transfer on the desired area of the garment with the design side facing upwards.
  3. Cover the bling transfer with a teflon or parchment sheet. This step is very important!
  4. Press the iron down firmly on top of the bling transfer for 20 seconds.
  5. Allow the bling transfer to cool down, rub it with your hand or a towel and then peel off the clear transfer. Make sure to peel gently instead of snatching the transfer off to avoid pulling off the bling spangles.
  6. If some of the spangles did not properly stick to the garment or are coming up, simply repeat steps 3, 4 and 5.

Heat Press Instructions

  1. Set your heat press to 330 degrees.
  2. Place the patch on the desired area of the garment with the design side facing up and the back (adhesive) side facing downward.
  3. Cover the patch with a teflon or parchment sheet. This step is very important!
  4. Press the patch and garment for 30 seconds.
  5. Turn the garment inside out and repeat step 3 and 4 for 10 seconds.
  6. Allow the patch to cool and then apply your next patch.

 


Share this Product

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

More from this collection